Home › Maple Street Collection
Lebanon Neighborhood

Maple Street Collection Window Treatment in Lebanon, IN

Custom Lebanon window treatment crews serving Maple Street Collection homeowners with free in-home measure, repair, replacement.

Call (317) 863-9966Get Free Assessment
Quick Answer

Answers for homeowners in this neighborhood of Lebanon. Where the houses are older, plaster returns and shallow stops are common, and both affect whether an inside mount is workable.

  • Services: faux wood blinds, wood blinds, vertical blinds, aluminum mini blinds
  • Service area: Maple Street Collection, Lebanon, IN and surrounding areas
  • For anything already installed, service visits are quick because we're working with parts. For new custom orders, expect a measure, then a few weeks of fabrication, then an install appointment we book once the product has been inspected.
  • Insured and bonded
  • Serving Lebanon, IN since 2008
About Maple Street Collection

Local Window Treatment Experience in Maple Street Collection

Residents here will usually say they live in Cedar Ridge, and in most conversations they do. The MLS record and Fischer's own paperwork separate the Maple Street Collection out, and so does a window order. If a neighbor two streets over sits in a standard Cedar Ridge plan, their finished widths and their opening count aren't yours. We treat this collection as its own measure. Expect roughly 14 to 22 openings per home against the 16 to 24 a current Fischer plan runs in the parent community, because a narrower lot buys a narrower street facing wall. That range is read from the product structure rather than from a plan set we've measured, and we'd rather flag it than pretend otherwise.</p><p style="font-size:16px;color:#4a5a6a;line-height:1.75;margin:16px 0 0">The rest of Lebanon is what makes this collection unusual. 4,528 of the city's 7,548 housing units predate 1980 and 3,253 of them date from 1940 to 1979, which is shallow jamb territory where an inside mount is a fight for every quarter inch. Here you get drywall returns with no applied casing and depth that's generous by comparison. The catch is the reverse of the usual one: a new house measures square the day we're in it and less square in three years, so we three point measure anyway and tell you where the movement will show. Only 131 Lebanon units were built in 2020 or later, 1.7% of the stock, which is why the habits that work across most of this city are the wrong habits on this street.

We have served Maple Street Collection homeowners through the full range of window treatment needs, from inspections and repairs to full replacements. Whatever the system, our Lebanon crew approaches every project with clear communication and respect for your property.

The Housing Here

Maple Street Collection housing: a Fischer Homes line inside Cedar Ridge

The Maple Street Collection is building out now inside Cedar Ridge to a Fischer Homes plan set, and 2026 listings show it actively selling. Past the builder and the parent community, the public record thins out fast. No home count is published. No lot dimension is published. Story mix and square footage aren't reported for the collection separately, and the price band isn't broken out either: the figures that exist are a Lebanon median list price of $320,000 and a median sale of $303,597, both citywide. We'd rather hand you that than a number we constructed. Everything that decides a window order gets established at the address.

What the name does tell you is real enough to plan around. In this market a separately named collection inside a larger community almost always denotes a distinct lot width, lot width drives frontage, and frontage drives how many openings face the street. That's the working difference between the Maple Street Collection and the standard Cedar Ridge plans beside it. The elevations are production traditional either way, drawn from the same Fischer catalog, so trim detail and return depth should read consistently across the collection. Consistency is worth money on a whole house order: when every opening carries one detail, a square check on three of them tells you whether the rest will behave.

Built
2020s, actively selling as of 2026, building out inside Cedar Ridge to a Fischer Homes plan set
Homes
Not published. No parcel level count exists for the collection and Boone County's parcel service was unreachable, so homes and lots are counted on site
Typical size
Not sourced. A named collection inside a larger community usually sits on a narrower lot than the parent plans, measured rather than assumed
Styles
Production traditional, a distinct Fischer Homes collection within Cedar Ridge
What It Means For Your Windows

Measuring the Maple Street Collection: new returns, new settlement

Plan on 14 to 22 openings per house, and plan on them repeating. That repetition is the biggest single difference between this collection and the 3,253 Lebanon houses built between 1940 and 1979, where openings were cut and trimmed one at a time and nothing matches anything. Repetition is good news for a price and bad news for a shortcut. When 18 windows share a detail, one measuring error copies itself 18 times. So we measure every opening: width at head, center and sill, height at both sides and again down the middle. On a custom order the factory takes the narrowest width and deducts 1/16 inch per side. On a square new opening that lands exactly where it should. On the same opening in three years, it may not.

Casing depth here is a drywall return with no applied casing, the condition that only 40.0% of Lebanon's stock offers. It gives you depth for a recessed cellular headrail or a shutter frame and a clean flat surface for brackets. It does not give you a light tight inside mount, and no product does. Lutron publishes 3/4 inch per side of light gap on an inside mount Roller 20/64 shade, and a bedroom in this collection will show that gap at six in the morning in June. If a room has to go dark, the answer is an outside mount, a side channel, or a light blocking pocket at the head, decided before the order rather than after the shade disappoints you.

14 to 22 openings, not Cedar Ridge's 16 to 24

A named collection inside a larger community normally sits on a narrower lot, and a narrower lot means a narrower front wall with fewer street facing openings. That puts the Maple Street Collection near 14 to 22 openings against the 16 to 24 a standard Fischer plan runs in Cedar Ridge proper. It's read from the product structure, not from a plan set, so we count on site before anything is priced.

Square today, less square by 2029

Fischer builds these square and they measure square. Then the frame works through its first two or three heating seasons, and Lebanon gives it both directions to move in: a January average high of 36.1F against a July average high of 85.2F. Blinds and shades hang off brackets and tolerate that movement. A shutter frame fixed tight to the opening does not, which is why frame choice matters more here than product choice.

The drywall return is flat, and that's the trap

With no applied casing there's nothing to land an outside mount on except drywall, so a bracket has to find framing or take a proper anchor. Inside mount is usually the cleaner answer in the Maple Street Collection. Just measure the return depth at the head as well as the sill: on production framing the two can differ by enough to move a headrail from fully recessed to sitting proud of the opening.

No plat orientation is published, so openness waits

Nobody publishes which way these lots face, and no dominant exposure is recorded for the collection anywhere we could reach. Exposure decides openness factor, so openness waits for the walk. A west wall in Lebanon takes hard low angle sun from about four in the afternoon through the muggy stretch from May 25 to September 22 and wants 3%. A north wall keeps its view at 5% or 10% and gives up nothing.

What We Specify Here

What we'd put in a Maple Street Collection house

Three products cover most of this collection, and the reasoning behind them isn't the reasoning we'd write for Cedar Ridge's larger plans or for D.R. Horton's houses at Angilee Gardens. A narrower lot puts side windows closer to the neighbor's wall, so privacy here is a side elevation problem rather than a street problem. New returns give real mounting depth, which puts inside mounts back on the table in a city where 43.1% of the stock fights them. And a house still working through its first settlement argues for products that hang from brackets over products fixed hard into the opening. National pricing for reference: custom work $250 to $2,600 per window, shutters $175 to $800. Custom fabrication runs 2 to 5 weeks from the order, so the calendar is a planning question rather than a rush.

Top down bottom up cellular shades

On a narrower collection lot the side windows sit close to the neighbor's wall, and a standard shade forces a choice between covering that view and losing the daylight with it. Top down bottom up doesn't force it: drop the top rail, leave the bottom of the opening closed, and the room stays private at eye level. DOE and Oak Ridge National Laboratory testing credits cellular shades with up to 20% of heating energy saved against a bare window, which counts in a Zone 5A January.

Solar shades

This collection's exposure isn't published, so openness gets picked at the walk instead of over the phone. 3% on a west wall cuts the afternoon glare and keeps a usable view. 5% on a north or east wall keeps more of it. One warning specific to a shallow new return: a reverse roll brings the fabric closer to the glass and cures the light bleed at the sill, but a reverse roll can't run behind a fascia. You get one or the other.

Flat fold Roman shades

A narrower front elevation usually puts two or three windows in a tight row, and a flat fold Roman reads as one composition across them where separate blinds read as hardware. The disclosure that belongs with it: a Roman never fully clears the glass. Stacked at the top it holds 8 to 12 inches of fabric depending on the drop, so on a shorter opening you're giving up the top of the view for good.

Getting Around

Maple Street Collection: schools, corridors and what isn't published

Plat boundaries for the Maple Street Collection aren't published in any source we could reach, and neither are its street names, so this page draws no map it can't stand behind. School assignment is documented: Lebanon Community School Corporation, with Lebanon Middle School and Lebanon Senior High School, and the elementary set by address across the corporation's four elementary schools. Note that parts of neighboring Whitestown fall inside the same corporation, so Lebanon schools and inside Lebanon aren't the same statement. The city itself runs 15.52 square miles with Interstate 65, US 52 and State Road 32 carrying the traffic, and the LEAP Research and Innovation District's 9,000 plus acres sits alongside it.

Lebanon Community School Corporation
Lebanon Community School Corporation elementary by addressLebanon Middle SchoolLebanon Senior High School
Services

Window Treatment Services in Maple Street Collection

Every service Lebanon Window Treatments offers across Lebanon is available to Maple Street Collection homeowners.

Faux Wood Blinds in Maple Street Collection

Slats that ignore a Lebanon August

Learn more →

Wood Blinds in Maple Street Collection

Basswood for the rooms with casing worth matching

Learn more →

Vertical Blinds in Maple Street Collection

The honest answer to a wide patio door

Learn more →

Aluminum Mini Blinds in Maple Street Collection

The shallowest blind we can hang, honestly described

Learn more →

Roller Shades in Maple Street Collection

One tube, no clutter, honest about the edges

Learn more →

Solar Shades in Maple Street Collection

Keep the fairway view, lose the afternoon glare

Learn more →

Cellular Shades in Maple Street Collection

The shade with real DOE test findings behind it

Learn more →

Zebra Shades in Maple Street Collection

View and privacy on one tube, limits included

Learn more →

Roman Shades in Maple Street Collection

Fabric that folds, with the stack accounted for

Learn more →

Woven Wood Shades in Maple Street Collection

Natural weave for the streets with real canopy

Learn more →

Blackout Shades in Maple Street Collection

Dark enough to sleep, honest about the edges

Learn more →

Plantation Shutters in Maple Street Collection

Millwork for openings that are not square

Learn more →

Cafe Shutters in Maple Street Collection

Privacy at eye level, daylight over the top

Learn more →

Motorized Shades in Maple Street Collection

Power for the openings nobody can reach

Learn more →

Custom Drapery in Maple Street Collection

Panels sewn to the room, hemmed after they hang

Learn more →

Valances & Top Treatments in Maple Street Collection

The finish over the headrail, honest about the rest

Learn more →

Exterior Solar Shades in Maple Street Collection

Stop the heat outside the glass

Learn more →

Retractable Awnings in Maple Street Collection

Shade you can put away before the wind arrives

Learn more →

Commercial Window Treatments in Maple Street Collection

Specified by elevation, documented opening by opening

Learn more →

Skylight Shades in Maple Street Collection

Tensioned channels for the glass over your head

Learn more →

Sliding Glass Door Blinds in Maple Street Collection

Handed to the door, not to the catalog

Learn more →

Panel Track Blinds in Maple Street Collection

Flat panels for glass wider than it is tall

Learn more →

Sheer Shades in Maple Street Collection

Soft vanes that tilt, never a blackout

Learn more →

Pleated Shades in Maple Street Collection

Folded fabric, honestly priced, no air pocket

Learn more →

Bamboo Shades in Maple Street Collection

Real reed, honest about what the weave lets through

Learn more →

Dual Shades in Maple Street Collection

Banded fabric, shimmed level before anything else

Learn more →

Top-Down Bottom-Up Shades in Maple Street Collection

Two lift paths, twice the hardware, stated plainly

Learn more →

Cordless Blinds in Maple Street Collection

No cord to manage, and a spring that ages

Learn more →

Hardwood Shutters in Maple Street Collection

Stained wood for rooms with woodwork worth answering

Learn more →

Composite Shutters in Maple Street Collection

Stable in wet rooms, heavy across wide openings

Learn more →

Smart Home Shade Integration in Maple Street Collection

Protocols planned before motors get ordered

Learn more →

Blind Repair & Restring in Maple Street Collection

Serviceable parts, and the truth when there aren't any

Learn more →

Shutter Repair in Maple Street Collection

Matched before it's scheduled, or we say so

Learn more →

Motorization Retrofit in Maple Street Collection

Motors into the headrails that will take them

Learn more →

Outdoor Patio Shades in Maple Street Collection

Anchored into structure, retracted before the wind

Learn more →

Office Window Treatments in Maple Street Collection

Reach ranges and openness factors, scheduled by elevation

Learn more →

Healthcare Window Treatments in Maple Street Collection

Documented, cordless, and built to be wiped down

Learn more →

Multifamily Window Treatments in Maple Street Collection

One spec per plan, one dye lot per property

Learn more →
Service Area

Lebanon Area Coverage

Maple Street Collection is one of several Lebanon communities we serve. We measure and install across Lebanon, Boone County, and surrounding areas.

Common Questions

Maple Street Collection Window Treatment FAQ

Questions we hear most often from Maple Street Collection homeowners.

No. Same builder, Fischer Homes, and the collection sits inside Cedar Ridge, so people use the two names interchangeably in conversation. A quote can't. A named collection normally carries a different lot width and therefore a different front elevation, which is why we work the Maple Street Collection at roughly 14 to 22 openings against 16 to 24 for a standard Fischer plan in the parent community. Neither figure comes from a published plan set. What goes on your order is what comes off the tape on your walls, and the two numbers are often not the same.
Yes, and it matters more than it sounds. New production framing measures square, and the factory deduction of 1/16 inch per side assumes it stays that way. Lebanon swings from a January average high of 36.1F to a July average high of 85.2F, so the frame works in both directions through its first heating seasons. A three point measure records width at head, center and sill so we know which dimension the factory is going to take. It costs nothing at the visit and it's the difference between a shade that tracks straight and one that rubs by year two.
Not from an inside mount on its own. Lutron publishes 3/4 inch per side of light gap on an inside mount Roller 20/64 shade, and on a June morning that gap is real light on the wall. If the room has to go dark, you have three routes: an outside mount that overlaps the opening on all four sides, side channels that close the vertical gap, or a light blocking pocket at the head. Each looks different and each prices differently. We settle it standing in that bedroom, before the order, not after the shade arrives.
Tell us now and we'll record the fabric, the color and the dye lot on your order. Fabric is dyed in runs, and a run bought twelve months later can sit slightly off the first one under Lebanon's flat winter light even when the color name matches exactly. In a house where 14 to 22 openings share sightlines through an open production plan, that difference is visible from one room to the next. Ordering the whole house at once avoids it. If you'd rather phase the work, we'll buy from a single run while the mill still has it.
Not bad, just frame dependent. A shutter panel hung in an L-frame fixed tight to a settling opening can bind at the stile as the frame moves through its first heating seasons. A Z-frame or a deco frame carries a flange that covers small movement and gives the panel room to sit. Composite handles Lebanon humidity better than hardwood in a bath. National shutter pricing runs $175 to $800 per window, and choosing the right frame costs nothing extra at the quote stage as long as somebody actually chooses it.
Custom fabrication runs 2 to 5 weeks from the day the order goes in, and that's after the measure visit. Nothing about a shade schedule needs rushing, and nobody should sell it to you that way. Under the Indiana Home Improvement Contract Act, IC 24-5-11, residential work over $150 requires a written contract with the work described and the total price stated, so you'll have that on paper before fabrication starts. Indiana issues no state license for this trade, so what's worth verifying instead is that the contractor is insured and insured.
Send a Message

Free Assessment in Maple Street Collection

Schedule a free, no-obligation window covering inspection. We respond promptly to all Maple Street Collection inquiries.

Service Area
Maple Street Collection, Lebanon, IN
Service area

Serving Lebanon and the surrounding area

Call NowGet Quote