Roman Shades

Roman Shades in Lebanon, IN

Fabric that folds, with the stack accounted for

Call (317) 863-9966Get Free Quote
Quick Answer

The questions below are the ones that come up during measures for this product. They're answered here so you can think about them before somebody is standing in your room waiting for a decision.

  • Service: Roman Shades for Lebanon homeowners
  • Service area: Lebanon, IN and surrounding areas
    • Getting somebody out to measure is the easy part and happens on a normal schedule. After that the fabricator needs roughly two to five weeks. We give you a specific window when we write the order.
  • Insured and bonded
  • Serving Lebanon, IN since 2008
Roman Shades Services

Expert Roman Shades for Lebanon Homes

A Roman shade is fabric that folds instead of rolling, and it belongs in rooms where the woodwork already has some ambition. That points straight at Ulen, where a period revival house from the 1924 to 1963 district carries 20 to 30 openings, and at the taller rooms in the 1,275 pre-1940 houses on the streets running out from the courthouse square. Colonial Revival elevations in that Ulen district use symmetrical multi light units with fanlights and sidelights, and a soft fold above the glass answers those proportions in a way a hard headrail never does. Elmwood, listing from $850,000, is the other place people ask for them by name.

Stack height is the cost, and it's a real one. When a Roman shade is fully raised, the folds gather into a stack that sits over the top of the opening, and on a flat fold that stack runs several inches deep, more on a relaxed or hobbled style. Inside mounted, that stack eats the top of your glass permanently. On a tall narrow upper floor opening on East Main Street, where the view is mostly upward anyway, we mount outside and above the trim so the raised shade clears the glass entirely. Fabric also comes in dye lots, so adding a shade to the same room two years later is a gamble we'd rather you take knowingly.

When to Call

Signs You Need Roman Shades

If you notice any of these in your Lebanon home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

Panels pile on the floor and collect dust

Folds hang crooked with creases from shipping

Existing fabric shades have faded along one edge

A stair landing window has never been treated

A wide fabric shade dips along its bottom edge

Hard treatments feel wrong in a soft room

One shade hangs lower on the left side

You want pattern without covering the whole wall

Rings and tapes print through in afternoon sun

The fabric you loved is nearly discontinued

Our Process

How Lebanon Window Treatments Handles Roman Shades

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

Three widths, three heights taken

2

Mounting depth read at top

3

Board mounted into real structure

4

Pattern placement drawn per window

5

Extra yardage set aside

Real Project Photos

Roman Shades in Lebanon

Photographs from real roman shades jobs completed by our crew in Lebanon and surrounding areas.

Custom shades measured and installed in Lebanon
Scope of Work

What Roman Shades Includes

Every Lebanon job is documented item by item. Here is what the crew covers.

Three widths and three heights taken at every opening, then a diagonal check so the shade hangs level

Mounting depth read at the top of the opening to see whether the stacked folds clear the trim on an inside mount

Stack height calculated from finished height, fold count and lining, then shown to you before anything is ordered

Outside mount height set above the opening wherever the stack would otherwise sit across the glass

Fold style specified room by room: flat, relaxed, hobbled or London

Fold count and fold depth written on the order so the bottom fold doesn't come up short

Lining specified per elevation, light filtering or room darkening or none, and stated in writing

Interlining added where the face fabric needs body or where the room wants weight and quiet

Pattern repeat measured so the motif lands at the same height on every shade in a room

Fabric run direction decided against the width, since a wide shade may need the goods turned

Ring rows and dowel pockets drawn to the fold spacing instead of a factory default

Lift chosen as cordless, a continuous cord loop with a tensioner, or a motor

Cord safety handled to ANSI/WCMA A100.1-2022, with cordless specified anywhere a child can reach

Mounting board wrapped in the face fabric where the board itself will show from the room

Return depth dimensioned on outside mounts so the sides close off against the wall

Brackets fastened into framing or into anchors rated for a lined shade's weight, not into bare drywall

Shades steamed on site so the creases from folding and shipping fall out of the cloth

Folds dressed by hand and the shade cycled a few times so every fold trains and breaks in the same place

Pricing

What Roman Shades Cost in Lebanon

National category figures put stock shades at roughly $60 to $600 per window and custom-fabricated shades at roughly $250 to $2,600 per window. Those are national ranges published for a category, not a price for any address in Lebanon, and Lebanon Window Treatments quotes from a measure rather than an average. Romans usually sit in the upper part of that band, because what you're buying is yardage and sewing rather than cloth wrapped on a tube. Fabric moves the number first and it's sold by the yard, so a large pattern repeat adds cloth before anyone cuts. Lining and interlining come next. Then fold style, since a hobbled shade eats noticeably more fabric than a flat one of the same size. Two Boone County windows of identical size can land far apart on cloth alone.

By Product

How Roman Shades Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

Flat Roman: One uninterrupted face of fabric when the shade is down, with folds appearing only as it rises. It shows a print or a weave better than any other style, and it's the one we specify in rooms that want a quiet, tailored line.

Relaxed Roman: Built without a dowel in the bottom fold, so the hem carries a soft curve instead of a straight line. It suits a kitchen window over a sink or a casual room, and it forgives a slightly unlevel opening better than a flat shade does.

Hobbled Roman: Permanent cascading folds stay stacked down the whole face whether the shade is up or down. It reads soft and traditional, it uses considerably more yardage, and it stacks much taller when raised. Plan the mount height around that.

London shade: Gathered at two points with soft tails falling at each side, usually hung as a stationary treatment or one that gets raised rarely. It's a decorative shade for a powder room, a stair landing or a window that never needs daily operation.

Dowel and ring construction: Rods sit in sewn pockets across the back and rings carry the lift cord. Pocket spacing sets fold depth, and drawing it against the finished height is how you avoid a runt fold at the bottom of an odd-height window.

Cotton sateen lining: The standard backing. It gives the shade body so folds hold their shape, it slows fading of the face fabric, and it puts the same neutral face toward the street from every window on an elevation.

Interlining: A soft flannel layer between face fabric and lining. It thickens the fold, quiets the room a little, adds real insulating bulk at a cold January window, and it turns a thin decorator fabric into a shade with weight.

Cordless lift: A spring-assisted mechanism raises and lowers the shade by hand with no loop hanging anywhere. It's the default in nurseries and any room a child uses, and on a lined Roman it wants correct spring sizing for the actual fabric weight.

Motorized Roman: A battery or hardwired motor lifts the shade on a remote or a schedule. It earns its keep on a shade above a stair, over a sink or on a tall window, and battery wands need changing about once a year.

Wrapped mounting board: The board the shade staples to, covered in the face fabric so it disappears when the shade is mounted outside the opening. Without it you see raw lumber above the shade from anywhere in the room.

Light Control

See What Each Fabric Does To The Light

Pick a fabric below and the window updates. It's a drawing rather than a photograph, so read it as a rough guide to what each family does in a Lebanon room, and to what it doesn't do.

Fabric type

Sheer, 10 percent openness

Ten percent of the weave is open, so you keep the view and most of the daylight. Glare drops a little. After dark, once your lamps are on, someone outside can read shapes through it, which is why this belongs on a view window rather than a bedroom.

Openness factor is printed on the fabric card, so you can compare one line against another before you order anything.

Keeps the viewNot private after dark

Solar, 5 percent openness

The usual pick for a west window or a covered porch. You can still read the yard through it, glare comes down noticeably, and the fabric intercepts a good share of the sun before it reaches you at four in the afternoon.

It also cuts the UV landing on floors and furniture. NFRC puts UV at roughly 40 to 60 percent of fading damage, so this slows fading rather than stopping it.

View and glare controlSlows fading

Solar, 3 percent openness

A tighter weave. The room goes dimmer and the view drops back to an outline. Choose it where the sun is the problem and the view is second, which around here usually means a west wall in July. That's a common call on this side of Indianapolis.

Openness affects how much you see out, not how private you are. A 3 percent fabric still shows silhouettes at night.

View becomes an outlineStrong glare control

Solar, 1 percent openness

Close to a solid fabric with a little view left in it. This is the strongest glare control in the solar family.

The trade is that it darkens the room on a gray January day too. Indianapolis averages a January high near 36F and the light is flat, so think about how the room reads in both seasons before you commit.

Darkest solar optionDim on gray days

Light filtering

No view through it. Daylight comes through the face diffused, so the room stays bright without a hot spot across the television or the kitchen island. This is the default for living spaces.

It isn't private in reverse at night. With the lamps on and the sun down, silhouettes still show.

No view through itBright without the glare

Room darkening

A denser fabric, usually with a liner behind it. Most of the light coming through the face is gone.

Light still arrives around the edges on an inside mount, so a room darkening shade gives you a dim room rather than a dark one. If someone in the house sleeps during the day, say so at the measure and we'll scope it differently.

Dim, not darkEdges stay bright

Blackout

The fabric itself passes essentially no light. What you'll still see is the perimeter. Lutron publishes an inside-mount light gap of about 3/4 inch per side on its Roller 20 and 64 shades, along with a standard factory deduction of 1/16 inch per side, and shades over 120 inches tall or past a 4:1 height-to-width ratio get larger gaps than that.

So if you need a genuinely dark bedroom, that gap has to be dealt with on purpose, either with side channels or by going outside mount. We tell you which one your opening can carry while we're still standing in the room.

Dark facePerimeter needs a plan

Openness factor is a measured fabric spec, so you can compare it line to line. The category names are not measured. One maker's room darkening can behave like another maker's light filtering, which is why the sample books come to the measure and get opened in the room they're going in, at the hour that room has the problem.

Common Questions

Roman Shades FAQ

Questions we hear most often from Lebanon homeowners considering roman shades.

More than people expect, which is why we measure the stack before you commit. A flat fold Roman raised to the top gathers into a stack that typically covers the upper several inches of the opening, and a relaxed or hobbled fold gathers deeper still. In a Ulen period revival house where the openings are tall and narrow by design, losing the top of the glass changes the proportion of the room. Mounting outside and above the trim solves it: the stack sits on the wall rather than in the opening, and the shade reads as intended when it's down.
Flat fold, usually. Colonial Revival elevations in the Ulen Historic District are symmetrical and disciplined, and a flat fold with even horizontal lines agrees with that. A relaxed fold introduces a soft curve along the bottom that suits a cottage room and fights a formal one. Hobbled keeps folds visible even when lowered, which adds richness and roughly a third more fabric to the yardage. We bring folded samples in your fabric rather than showing you photographs, because the difference between these three is entirely about how light crosses the fold in your room.
Yes, and usually twice over. A lining protects the face fabric from the direct light that would otherwise take the color out of it, and an interlining adds body so the folds hang evenly rather than collapsing. The NFRC puts ultraviolet light at something like 40 to 60 percent of fade damage, so a lining slows the process without ending it. There's a second reason in this climate: with a January average low of 20.9 degrees, a lined and interlined shade puts real material between the room and the glass, which you feel standing near the window in February.
You can order the same fabric name. You can't order the same dye lot. Fabric is dyed in runs and the color drifts between them, sometimes only a shade, sometimes enough to see when two shades hang on the same wall in afternoon light. If the plan is to finish a room in stages, we'd rather cut all the shades from one bolt now and hold the extra boxed until the room is ready. Where that isn't practical, we record the mill, the pattern and the lot so the second order starts from a known point.
Specify a cordless or a continuous cord loop with a tensioner anchored to the wall, and the answer is yes. What we won't fit is a loose operating cord hanging free beside a shade. Federal rules treat inner cords as a substantial product hazard, at 16 CFR 1120.3, and the shades we order are built to the ANSI/WCMA A100.1-2022 product standard. That's a claim about a product and never about a company. A cordless Roman is a little heavier to raise because you're lifting the fabric and the stack by hand, and in a tall opening that's worth trying in the showroom first.
It will hang, but think about the raised state. Lebanon holds 756 units from the 1950s, and the minimal traditional plans in that group front the house with a single wide opening. A Roman shade that wide is heavy to lift, the folds want to sag in the middle without a rigid dowel in each pleat, and the stack across that span is a substantial visual mass sitting over your main view. Two shades side by side under one board is usually the better answer, and it lets you leave half the window covered.
More than most people picture, and this is the part nobody asks about until it's hanging. A raised Roman gathers into a stack of folded cloth at the top, and that stack has real depth. A lined shade on a tall window can take up a foot or more of height when it's all the way up. On an inside mount, that stack sits over the top of the glass all day. The fix is knowing the number before you order, which is why we calculate it at the measure and show it to you.
Start with the room rather than the catalog. A flat Roman is the cleanest and shows a pattern best, so it goes in rooms that want a tailored line. A relaxed shade has a soft curve in the hem and reads casual, which suits kitchens and cottage-style rooms. Hobbled keeps its folds all the way down and looks traditional, but it uses more cloth and stacks taller. A London shade is decorative and mostly stationary. We bring samples of the same fabric made three ways so you can see it rather than imagine it.
Inside looks cleaner and shows off your trim, but it needs depth, and the stack still lands over your glass when the shade is up. Outside mount is what we reach for when the view matters, because the board can go well above the opening and the whole stack sits on wall instead of window. Outside also closes off the light gaps at the sides. In a Lebanon room with a view worth keeping, outside mount is usually the right call even though it covers a little trim.
A room darkening or blackout lining stops light coming through the cloth, and that's genuinely most of the light. What it can't do is stop light coming around the shade. An inside-mounted Roman leaves a gap at each side, and light walks straight through it. For a bedroom that has to be dark, you want an outside mount with generous overlap, or a blackout roller with side channels underneath and the Roman on top for looks. We'd rather say that now than after you've paid for lining.
Yes, and in most houses you should. Cordless lift uses a spring mechanism you operate by grabbing the hembar, and motorized removes the question entirely. ANSI/WCMA A100.1-2022 is the product safety standard this trade works to, and inner cords that aren't compliant are treated as a substantial product hazard under 16 CFR 1120.3. On a heavy lined shade the spring has to be sized to the actual fabric weight, so tell us about the lining before the order goes in, not after.
Wider than you'd think and narrower than you'd like. Fabric shades get heavy fast, and past a certain width the cloth starts to sag between the rings and the lift gets hard to work. On a wide opening we'll usually split it into two shades on one board, matched at the pattern so they read as a pair. That also keeps each shade at a weight a person can raise without a fight. The exact limit depends on the fabric and the lining, which is why we decide it at the window.
Because you're buying cloth by the yard and then paying someone to sew it. A shade that takes four yards of a mid-priced fabric and a shade that takes seven yards of an imported weave aren't in the same conversation, and the second one hasn't even reached the sewing table yet. Pattern repeat adds yardage on top, since motifs have to land at the same height across a room. Fold style adds more. We figure yardage during the quote so the number isn't a surprise on the order.
They will if the shade was built and dressed properly. Fold spacing is set by the dowel pockets and ring rows, so it's baked into the construction rather than something that drifts. What does go wrong is a shade that was never trained: it arrives folded flat from the factory, gets hung, and the shipping creases live in the wrong places forever. We steam on site, then dress each fold by hand and cycle the shade so the cloth learns where it bends.
In a kitchen, yes, with sense about placement. Fabric near a cooktop takes on grease and cooking smells, so we keep Romans on the window over the sink and off the window beside the range. In a full bathroom with a shower running daily, fabric holds damp and the folds can hold it longer. A poly shutter or a moisture-tolerant shade does better in that room. A powder room with no shower is fine, and a London shade there looks terrific.
Vacuum the face with a brush attachment a few times a year, working down the folds rather than across them. Steam wrinkles out instead of pressing them. For anything worse, use a cleaner who handles fabric window treatments specifically and will take the shade down and rehang it. Do not put a lined Roman in a washing machine. Face fabric, lining and interlining shrink at different rates, and the shade comes out with a wavy hem that nothing fixes.
A roller is the working answer: it rolls onto a tube, takes almost no height when it's up, and handles glare and privacy cheaply. A Roman is the design answer, because folded cloth softens a room in a way a flat panel of fabric on a tube never does. Rollers win on tall windows where stack height would eat the view and in rooms where you raise and lower every day. Plenty of houses use both, with rollers on the working windows and Romans where the room is meant to feel finished.
Sometimes, and plan as if you can't. Decorator fabric runs in dye lots, and a bolt woven a year from now can sit slightly off the one your shades came from. On the same wall in daylight, that difference shows. If you know a second phase is coming, buy the yardage now even if the sewing waits. Either way we record the fabric name, the lot and the finished sizes on your file, which gives a reorder a real chance instead of a hope.
It's a soft flannel layer sewn between the face fabric and the lining, and it does three things at once that are hard to get any other way. It gives the fold depth and a rounded edge instead of a sharp crease. It quiets a hard-surfaced room. And it puts real bulk between the room and a cold window in January, which you feel standing near the glass. It also adds weight, so the lift and the brackets get sized for it.
Yes, and it's a common way to finish a room. The Roman does the working part, handling glare and privacy at the glass, while the panels add height and softness at the sides. Two things to check at the measure: the drapery rod needs enough projection to clear the raised stack of the Roman, and the shade's mounting board has to sit where the rod brackets won't fight it. Get the order wrong and the panels rub the shade every time they move.
Areas We Serve

Roman Shades Across Lebanon

We measure and install in every one of these Lebanon neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in Lebanon

Lebanon Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in Lebanon

Slats that ignore a Lebanon August

Learn more →

Wood Blinds in Lebanon

Basswood for the rooms with casing worth matching

Learn more →

Vertical Blinds in Lebanon

The honest answer to a wide patio door

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in Lebanon

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
Lebanon, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 863-9966
Service area

Serving Lebanon and the surrounding area

Call NowGet Quote